TEMPERATURE SENSORS

Resistance Thermometers are used in the place where precise temperature measurement is required in the industry. It is based on the variation of the electrical resistance of the conductor depending on the temperature. A resistance detector wrapped in thin platinum or nickel wire insulated in enamel, glass or ceramic is used as conductor. The detector provides 100 ohm resistance output at 0 ºC. Temperature is determined by measuring the increasing or decreasing values of the resistance depending on the temperature. Copper, silver or nickel-chrome connection wires are added to both ends of the resistance detector. -It can be used from 200ºC to +850 ºC. Analogue output information is obtained with PT100 sensors in accordance with EN60751 and evaluated in the automation system.

ETT MODELS

ETT 01 – RTD Temperature Sensor Stud Type

Terminal
Stainless Steel
1xpt100
6 mm

ETT 02 – RTD Temperature Sensor Threaded Type

½" BSP Std.
Terminal
Stainless Steel
1xpt100
6 mm

ETT 03 – RTD Temperature Sensor Neck Type

½" BSP Std.
Terminal
Stainless Steel
1xpt100

ETT 05 – RTD Temperature Sensor Inset Type

Terminal
Stainless Steel
1xpt100
Probe Diameter: 6 mm

ETT 06 – Temperature Sensor with PG Socket

½" BSP Std.
PG 9 Socket
Stainless Steel / PTFE
(-)30 …+ 200 °C

ETT 09 – Temperature Sensor Socket

½" BSP Std.
DIN43650 Socket
Stainless Steel / PTFE
1xpt100
(-)30 … 100 °C

ETT 10 – Temperature Sensor Socket

½" BSP Std.
DIN43650 Socket
Stainless Steel / PTFE
1xpt100
(-)30 … 200 °C 

ETT 11 – Temperature Sensor Room Type

PG7 Socket
Stainless Steel
1xpt100 / (ETT 12 with seramic sensor)

(-)40 … 80 °C 0 … 80 °C

ETT 11/12 – Temperature Sensor Room Type

PG7 Socket
Stainless Steel
1xpt100 / (ETT 12 with seramic sensor)
(-)40 … 80 °C 0 … 80 °C

ETT 11m / 12m – Temperature Sensor Wall Type

Stainless Steel
Cable Output
1xpt100 (-)20 … (+)80 °C , (-)0 … (+)80 °C
With Holes

ETT 13 – Temperature Sensor Channel Type

PG7 Socket, 1/2 BSP Union
Stainless Steel
1xpt100
(-)40 … 80 °C