ELS-tx MODELS

ELS-tx float level transmitter operates vertically in liquid tanks and is a common measurement method that provides level control by sensing the float thanks to the sensors placed by spacing 5mm / 10mm / 15mm in the pipe.

ELS-tx float level transmitter: It is divided into options according to the operating temperature, liquid material, density, desired signal (4-20mA / 0-10 V / OHM) and cable output type, and the desired sensitivity.

Scope of application:

It is one of the methods for level control in all liquid tanks below 125°C and 30 bar. It is a frequently preferred measurement method in fuel tracking and sea transportation.

• Diesel and gasoline fuel tracking
• Level tracking of aggressive chemical liquids
• Marine sector level measurements
• High precision level tracking

ELS-tx Protected

2”BSP , 0.80 g/cm³ ,30 bar
2 Wires , 4-20mA
3 Wires , 4-20mA, 0-20mA,
20-4mA
0-10V, 0-5V, 0-1V, 10-0V
Stainless Float , Ø52
Housing: PBT

ELS-tx Socket

2” BSP , 0.68 g/cm³ ,30 bar
2 Wires .. 4-20mA
3 Wires .. 4-20mA, 0-20mA, 20-4mA
0-10V, 0-5V, 0-1V, 10-0V
Stainless Float , Ø52

ELSp-tx Completely Plastic

2” BSP , 0.65 g/cm³ , 5 bar
2 Wires .. 4-20mA
3 Wires .. 4-20mA, 0-20mA, 20-4mA
0-10V, 0-5V, 0-1V, 10-0V
Stainless Float , Ø48
Housing: PBT

ELSy-tx With Plastic Float

1 1/4” BSP , 0.7 g/cm³ 2 Wires , 4-20mA
3 Wires , 4-20mA, 0-20mA, 20-4mA
0-10V, 0-5V, 0-1V, 10-0V
Float Diameter : 35 mm
PU Float

ELSy-tx Ohm Output

1 1/4” BSP, 0.7 g/cm³
Resistance, …….Ohm
Float Diameter : 35mm

ELSy-tx Ohm Output

1 1/4” BSP, 0.7 g/cm³
Resistance, …….Ohm
Float Diameter : 35mm