ECAPm MODELS

ECAPm OEM capacitive level transmitter provides sensitive proportional measurement opportunity in the level tracking of solid and liquid materials despite dust, foam, dirt or similar particles. Thanks to its economic structure, it is more suitable than many proportional measurement methods and is preferred by manufacturers as an OEM.

The capacitive measuring principle is based on detecting the changing capacity value depending on the mass between the electrode and the tank surface. The sensor electrode is immersed in the material up to the desired point after the installation. The first point where the sensor touches the fluid is defined as 4mA and the maximum point as 20mA. Thus, the sensor, which detects only the unique capacity created by the material, is not affected from other materials in the fluid and offers a high sensitivity.

ECAPm OEM capacitive transmitter is prepared for machine manufacturers and special projects.

Scope of application:

ECAPm capacitive sensors do not have an area limit for industrial level measurement. It can be used in pump or valve control of water and fuel tanks, alarm output of aggressive chemicals, filling-discharge systems of dry solids such as dust or cereals, and even level detection of very hot and sticky materials such as bitumen. It is frequently preferred in fuel tracking and leakage systems, pharmaceutical industry, marine industry, plastic and similar raw material manufacturing, flour and feed storage.

ECAPm 101 – Conductive Liquids

1” BSP Male Thread , (Max. 1m. Min.100mm)
1/2” BSP Male Thread , (Max. 1m. Min.100mm)
3/4” BSP Male Thread , (Max. 1m. Min.100mm)
(-)1 …(+)100bar, (-)40…(+)150°C
4-20mA Two Wires (Std.)
Ops. 0/4-20mA – 0-10V Three Wires
Aluminum Housing

ECAPm 203 – Insulating Liquids

1/2” BSP Male Thread , (Max. 500mm – Min. 100mm)
3/4” BSP Male Thread , (Max. 500mm – Min. 100mm)
(-)1…(+)60bar, (-)40…(+)150°C
4-20mA Two Wires (std.)
Ops. 0/4-20mA – 0-10V Three Wires
Aluminum Housing

ECAPm 408 – Aggressive Chemicals

1” BSP Male Thread , (Max. 500mm – Min. 100mm)
(-)1…(+)25bar, (-)20…(+)80°C
4-20mA Two Wires (std.)
0/4-20mA, 0-10V Three Wires
Connection Material: Delrin
Aluminum Housing

ECAPr 203 – Ohm Output Economic Model

Coaxial Probe (Conductive / Nonconductive Tanks)
1/2” BSP Male Thread
Body Material : Polyamide + Grained
Pipe Material : 304 St.St.
Ohm Output
Max. 80°C.