DX-ELS-tx MODELS

DX-ELS-tx level sensors are used for tank levels and for controls. In the float when the magnet magnetic area moves according to the liquid in the tube, then the reed swicthes the electrical circuit on or off when it reaches the level of the sensor.Reed swicthes in and out. The changes of the reed sensors with alarm or a level information can be assessable with a relay circuit or a control device.Sensitivity increases according to reed sensor lowering range.The advantages of providing the analog output in the enclosure are preferred by the users.

Application areas:
Tank level measurement and control,boiler kontrol,store room control. Yatch water level control,unclean water level control. Hydraulic oil tank level measurement and control.

DX-ELS-tx

2”BSP , 0.60 g/cm³ ,30 bar
2 Wires , 4-20mA
3 Wires , 4-20mA, 0-20mA, 20-4mA
0-10V, 0-5V, 0-1V, 10-0V
Stainless Float , Ø52
Housing: Aluminum

DX-ELS-tx 

DN50 , PN16 Flanged , 0.60 g/cm3
,30 bar
2 Wires , 4-20mA
3 Wires , 4-20mA, 0-20mA, 20-4mA
0-10V, 0-5V, 0-1V, 10-0V
Stainless Float , Ø52
Housing: Aluminum