DX-ECAP MODELS

DX-ECAP level transmitter is a capacitive level sensor for level measurement of conductive liquid, low conductive liquid, granulated materials with solid particles, adhesive and acid/basic liquids. When a material comes between electrode rod and tank wall, a capacitance change occurs and when this change exceed adjustment threshold, contact output is delivered. Full-empty calibration can be performed easily and safely. Different designs and different solution related to industrial level measurement are offered especially for machinery manufacturers.

Application Areas
– Liquid tanks, food machines, cooling liquid tanks, shipping, glycol tanks, brine, waste water tanks.
– Oil tanks, CO2 liquid tanks, high temperature tanks, non-conductive liquids.
– Grain stores, cement, sand feed, flour, milk powder, organic and plastic granule.
– Sticky hot and high viscosity liquid, acid and chemical liquids.

It provides ease of measurement in various areas such as liquid tanks, glycol tanks, food machinery, coolant tanks, ships, brine tanks, waste water, wine tanks, clean water tanks.

Features;
In our DX-ECAP 100 series, our operating temperature is (-) 40°C / (+)150°C (Depends on the model)
For a Cryogenic Vessels up to 200°C with refrigerant apparatus (-) 196°C For Rubber-Coated (-) 50°C…(+) 80°C for FKM (-) 30C…(+) 200°C
The ambient temperature is (-)20°C…(+)60°C.
The connection material is 304 Stainless Steel Opt. and 316 Stainless Steel
The insulation material is PFA Std. Opt. PEEK, PTFE , Rubber , FKM
Our Operating Pressure is (-)1…(+) 25 bar
(Depends on the model)
Housing: It is aluminum.

It provides ease of measurement in various areas such as liquid tanks, glycol tanks, food machinery, coolant tanks, ships, brine tanks, waste water, wine tanks, clean water tanks.

Features;
In our DX-ECAP 200 series, our operating temperature is (-) 40°C / (+) 150°C (Depends on the model)
For a Cryogenic Vessels up to 200°C with refrigerant apparatus (-) 196°C For Rubber-Coated  (-) 50°C…(+) 80°C for FKM (-) 30°C…(+) 200°C
The ambiant temperature is (-)20°C …(+)60°C.
The connection material is 304 Stainless Steel Opt. and 316 Stainless Steel.
The insulation material is PFA Std. Opt. PEEK, PTFE , Rubber , FKM.
Our Operating Pressure is (-)1…(+) 25 bar (Depends on the model)
Housing: It is aluminum.

It provides ease of measurement in various areas such as liquid tanks, glycol tanks, food machinery, coolant tanks, ships, brine tanks, waste water, wine tanks, clean water tanks.

Features;

In our DX-ECAP 300 series, our operating temperature is (-) 40°C / (+) 150°C (Depends on the model)
For a Cryogenic Vessels up to 200°C with refrigerant apparatus (-) 196°C For Rubber-Coated  (-) 50°C…(+) 80°C for FKM (-) 30°C…(+) 200°C
The ambiant temperature is (-)20°C …(+)60°C.
The connection material is 304 Stainless Steel Opt. and 316 Stainless Steel.
The insulation material is PFA Std. Opt. PEEK, PTFE , Rubber , FKM.
Our Operating Pressure is (-)1…(+) 25 bar (Depends on the model)
Housing: It is aluminum.

It provides ease of measurement in various areas such as liquid tanks, glycol tanks, food machinery, coolant tanks, ships, brine tanks, waste water, wine tanks, clean water tanks.

Features;

In our DX-ECAP 300 series, our operating temperature is (-) 40°C / (+) 150°C (Depends on the model)
For a Cryogenic Vessels up to 200°C with refrigerant apparatus (-) 196°C For Rubber-Coated  (-) 50°C…(+) 80°C for FKM (-) 30°C…(+) 200°C
The ambiant temperature is (-)20°C …(+)60°C.
The connection material is 304 Stainless Steel Opt. and 316 Stainless Steel.
The insulation material is PFA Std. Opt. PEEK, PTFE , Rubber , FKM.
Our Operating Pressure is (-)1…(+) 25 bar (Depends on the model)
Housing: It is aluminum.