BUILDING / CONSTRUCTION PRODUCTS

GF 2 

The Humimeter GF2 building moisture meter is a professional and versatile building moisture meter which can be extended with various sensors to match your individual needs. As the GF2 offers such a wide variety of functions we recommend some well proven configurations for popular tasks in the building industry. Especially notable is the blazingly fast nondestructive measurement of floor screed without using the tedious CM method.

Measuring range building moisture: dependent on the material
Resolution: 0.1% water content
Measuring range air humidity 0-100 % r.h.
Infrared temperature measurement -25 to +125°C / -13 to 257°F
Measuring area of infrared sensor: 16 cm diameter at a distance of 1 meter
Measurement of CO2 up to 5000ppm
Temperature can be set to °C or °F as required

GE 1 

The humimeter GE1 screed and concrete moisture meter offers fast, professional and nondestructive measurements of concrete moisture and screed moisture. It offers a lot of features like automatic temperature measurement and compensation, automatic conversion to CM% and digit calibrations curves for special products.

Measuring range: 0-10% water content
Resolution: 0.1% water content
Temperature can be set to °C or °F as required
Automatic temperature compensation
Hold function
Large, well-lit LC display
Dimensions 147 x 75 x 30 mm

SW 1 Weather Protector

Prevent your home against mould with the humimeter mould and air guard. The device sends an alarm to you if there is any danger of mould formation and tells you when it is necessary and possible to aerate the room.

Evaluation of risk of mould (no/little/increased/high/very high risk of mould)
Relative air humidity 0 to 100%, resolution 0.1%RH,
Temperature can be set to °C or °F as required
Temperature  -10 to +60°C / 14 to 140°F, resolution 0.1°C,
Absolute air humidity 0 to 130 g/m³, resolution 0.1g/m³
Hold function, manual saving of results