DX-ECAS MODELS

The DX-ECAS exproof capacitive level switch offers high precision limit control for the level management of solid and liquid materials, despite dust, foam, dirt or similar particles in exploosive areas.

The capacitive measuring principle is based on detecting the changing capacity value depending on the mass between the electrode and the tank surface. The sensor electrode is immersed in the material up to the desired point after the installation and the value read by the sensor is recorded as the limit level. Thus, the sensor, which detects only the unique capacity created by the material, is not affected from other materials in the fluid and offers a high sensitivity.
The DX-ECAS exproof capacitive switch is designed for the most difficult conditions. It offers a long lifetime even in high temperature and pressure environments. 

Scope of application:

The DX-ECAS exproof capacitive sensors do not have an area limit for industrial level measurement. It can be used in pump or valve control of water and fuel tanks, alarm output of aggressive chemicals, filling-discharge systems of dry solids such as dust or cereals, and even level detection of very hot and sticky materials such as bitumen.

It provides easy measurement for low-conductive liquids, conductive liquids, solid particulate materials.

Features;
Our tooth dimensions in our DX-ECAS 100 series are R 3/4" – R 1/2" – R 2" – R 1 1/2" Male Tooth (Min.1mt – Max.16mt) (Min in our rope products. 1mt – Max. 32mt)
Our Operating Temperature is (-)40…(+)150°C.
It can be removed up to 200°C with cooling apparatus, 230°C with Peek insulation, 400°C with Ceramic insulation.
Our connection matterials 304 Stainless Steel Opt. and it is 316 Stainless Steel.
Our Working Pressure is (-)1…(+)100 bar.
The Output of Our Products: 1x5A/250VAC NA/NK Relay.
Housing: It is aluminum.

It provides easy measurement for low-conductive liquids.

Features;
Our tooth dimensions in our DX-ECAS 200 series are R 3/4" – R 1/2" – R 2" – R 1 1/2" Male Tooth (Min.1mt – Max.16mt) (Our rope products in Min. 1mt – Max. 32mt)
Our Operating Temperature is  (-)40…(+)150°C.
It can be removed up to 200°C with cooling apparatus, Peek insulation 230°C , Ceramic insulation with 400°C.
Our Connection matterials 304 Stainless Steel Opt. and 316 Stainless Steel.
Our Working Pressure is (-)1…(+)100 bar.
The Output of Our Products: 1x5A/250VAC NA/NK Relay.
Housing: It is aluminum.

Low-conductive solids provide easy measurement for materials with solid particles.

Features;
Our tooth dimensions in our DX-ECAS 300 series are R 3/4" – R 1/2" – R 2" – R 1 1/2" Male Tooth (Min.1mt – Max.16mt) (Our rope products in Min. 1mt – Max. 32mt)
Our Operating Temperature is (-)40…(+)150°C.
It can be removed up to 200°C with cooling apparatus, 230°C with Peek insulation, 400°C with Ceramic insulation.
Our Connection Materials 304 Stainless Steel Opt. and 316 Stainless Steel.
Our Working Pressure is (-)1…(+)100 bar.
The Output of Our Products: 1x5A/250VAC NA/NK Relay.
Housing: It is aluminum.

It provides easy measurement for low-conductive liquids, conductive liquids, solid particulate materials, adhesive and acid/basic liquids. ECAS 400 is included in our products in our series as double probe (single insulated), double probe (non-insulated) and double probe (insulated).

Features;
Our tooth dimensions in our DX-ECAS 400 series are R 3/4" – R 1/2" – R 2" – R 1 1/2" Male Tooth (Min.1mt – Max.16mt) (Our rope products in Min. 1mt – Max. 32mt)
Our Operating Temperature is (-)40…(+)150°C.
It can be removed up to 200°C with cooling apparatus, 230°C with Peek insulation, 400°C with Ceramic insulation.
Our Connection Materials 304 Stainless Steel Opt. and 316 Stainless Steel.
Our Working Pressure is (-)1…(+)100 bar.
The Output of Our Products: 1x5A/250VAC NA/NK Relay.
Housing: It is aluminum.